Filters and tips: formats, widths and materials
Filters and tips are short mouthpieces used with rolling papers. They come as flat cardboard tips in booklets, pre-rolled tips and reusable glass tips. This article describes the formats, widths, materials and how to clean glass tips.
Flat cardboard tips in booklets
The most common format is flat strips of thin cardboard in a booklet. The rectangular strips are folded and rolled into a tube.
Booklets come with or without perforations. Perforated tips have pre-punched lines across the strip to guide the first folds. Unperforated tips are completely smooth.
Pre-rolled tips
Pre-rolled tips are short cylindrical tubes of a fixed diameter. They are often sold in boxes or bags of many pieces.
The fixed diameter makes measurements easy to compare between packs. The diameter is usually stated on the packaging in millimetres.
Width: Slim and standard
Tips come in two main widths: Slim and standard (often called Regular). Slim tips are narrower and make a tube of smaller diameter.
Tip width should match paper width. Slim tips go with Slim papers, and standard tips with standard-width paper. Dimensions and names are stated on the pack.
Materials: cardboard, unbleached paper and glass
Cardboard tips come bleached (white) or unbleached (brown). The difference is whether the fibres were bleached during manufacture; thickness and format are otherwise the same.
Glass tips are made from borosilicate glass. They are reusable, withstand temperature changes and can be washed. Glass is harder and heavier than cardboard and can shatter if dropped onto a hard surface.
Cleaning and storage
Clean glass tips with isopropyl alcohol and a pipe cleaner through the opening, then rinse in warm water. Let them dry completely before storage.
Store cardboard tip booklets and boxes dry and flat to prevent strips bending or getting damp. Keep glass tips in a case or box that protects against impacts.