14 mm or 18 mm joints – finding the right size

Bowls, downstems, glass chambers and adapters use ground glass joints. Parts fit only when both size and gender match. This guide explains the sizes and how to check them.

What do 14 mm and 18 mm mean?

The number is the approximate outer diameter of the male joint in millimetres. Common sizes are 10, 14 and 18 mm. 14 mm is most common on standard-sized bongs, while 18 mm is usually on larger bongs. 10 mm is mainly for small rigs and accessories. The ground joint is standardised, so parts from different manufacturers fit when the size matches.

Male and female

A male joint protrudes and slides into a female joint. Most bongs have female joints and male bowls. Some models, especially small rigs and certain sets, have male joints and need female bowls. Product names often list size and gender, such as “14 mm male”.

How to measure the joint

Measure the outer diameter of a male joint or the inner diameter at the opening of a female joint with callipers or a ruler. Around 10 mm indicates a 10 mm joint, around 14–15 mm a 14 mm joint, and around 18–19 mm an 18 mm joint. An easier option is to compare it with a part of known size. If the measurement is stated on the product page, it was provided by the supplier.

Angles: 45 and 90 degrees

Some accessories, such as ash catchers and adapters, specify an angle. It must match the bong's joint angle for the part to stand vertically.

Adapters

An adapter allows a different size or gender, such as 18 mm female to 14 mm male. It makes the setup taller and adds a joint to keep clean. Clips hold joints together and stop parts sliding apart.

Caring for ground joints

Dirty ground glass joints can seize. Clean regularly and dry before assembly. If a part sticks, warm water around the joint may help. Never use force, as the glass may crack.

Frequently asked questions

Does a 14 mm bowl fit an 18 mm bong?
Not directly. You need an 18-to-14 mm adapter with the correct male/female connections.
How do I know if the joint is male or female?
A male joint protrudes; a female joint is an opening into which another part slides.
Which size is most common?
14 mm is the most common joint size on standard-sized bongs.