Glossary: parts, materials and dimensions explained
This glossary explains the terms used in our product descriptions: part names, joint sizes, materials, paper formats and cleaning equipment.
Glass parts
Names of parts in bongs, water pipes and glass pipes.
- Base: the bottom part on which the tube stands. Available as a flat foot, beaker or sphere.
- Banger: a glass or metal dish inserted into the joint, specified by joint size (e.g. 14 mm).
- Water chamber: the space in the tube that holds water.
- Bowl: the small glass cup in the downstem or directly in the joint.
- Downstem: the glass tube leading from the joint into the water chamber, often with holes or slits at the bottom.
- Percolator: a glass part inside the tube with arms, holes or slits. Types include tree (branching), disc and spiral percolators.
- Ice catcher: three or more glass protrusions inside the tube that narrow its diameter.
- Mouthpiece: the top opening of the tube.
- Carb hole: a small hole in the side of a pipe or bubbler.
- Bubbler: a small glass pipe with its own water chamber.
Joints and dimensions
Glass parts connect through ground joints in standard sizes.
- Joint: the ground connection between two glass parts.
- Male: a joint that fits inside another part, ground on the outside.
- Female: a joint that receives a male part, ground on the inside.
- 10, 14 and 18 mm: standard joint sizes. A 14 mm female joint takes a 14 mm male joint.
- Adapter: a connector between two different sizes or genders, for example 18 mm male to 14 mm female.
- Glass thickness: wall thickness in mm, for example 5 or 7 mm.
- Height: measured from the bottom of the base to the mouthpiece.
Materials
The materials used in the equipment.
- Borosilicate glass: glass that withstands temperature changes better than ordinary glass.
- Silicone: a soft, flexible material that withstands drops and high temperatures.
- Acrylic: hard plastic that is lighter than glass but scratches more easily.
- Aluminium: a lightweight metal, often colour-anodised.
- Zinc alloy: a heavier metal used in grinders.
- Stainless steel: used in screens, ashtrays and tools.
- Ceramic: fired clay, glazed or unglazed.
Papers and filter tips
Rolling paper formats and materials.
- Single Wide: a short format, approximately 70 mm.
- 1 1/4: approximately 78 mm long.
- King Size: approximately 110 mm long.
- Slim: a narrower version of a format, for example King Size Slim.
- Grammage: the paper's weight per square metre. Lower grammage means thinner paper.
- Bleached and unbleached: bleached paper is white; unbleached paper retains its natural brown colour.
- Rice paper, hemp paper and wood pulp: paper made from different fibres.
- Filter tip: a piece of cardboard or a pre-rolled cardboard tube. Width is stated in mm.
- Cone: a pre-shaped paper cone with a filter tip.
- Booklet: a cardboard cover holding folded sheets.
Grinder parts
The parts of a grinder.
- Lid: the top part with teeth underneath, often held by a magnet.
- Teeth: pegs, often diamond-shaped, in the lid and grinding chamber.
- Grinding chamber: the chamber where the teeth meet.
- Screen: fine mesh between two chambers.
- Bottom chamber: the lowest chamber beneath the screen.
- Threads: the screw connection between chambers.
- Scraper: a small tool often included.
- 2-piece, 3-piece and 4-piece: the number of parts in the grinder.
Cleaning
Products and equipment for cleaning glass and metal.
- Isopropyl alcohol: alcohol that dissolves residue on glass and metal. Flammable.
- Coarse salt: used with isopropyl alcohol as a mild abrasive.
- Pipe cleaner: a flexible brush for narrow tubes and holes.
- Cleaning plugs: silicone or rubber plugs that seal openings during cleaning.