Grinders

Tobacco grinders vary in diameter, height and number of sections. Compare these details across materials.

Grinders: parts, materials and dimensions

A grinder has two toothed halves that turn against each other. Threads hold the parts together, and many models have a magnet in the lid.

A 2-piece grinder has a lid and one chamber with teeth. A 4-piece grinder also has a middle chamber with a fine-mesh screen and a bottom chamber beneath it. More parts make the grinder taller and heavier, with more surfaces to clean.

Aluminium is the most common material. It is lightweight for its size, and anodising gives a lasting colour and protects against oxidation. Biodegradable grinders are lighter than metal ones, and their teeth wear faster.

Diameter is stated in millimetres; common sizes are approximately 40, 50, 55 and 63 mm. Height follows the number of parts. Threads, magnetic lids and flat bases are described on the item where specified.

Clean chambers with a stiff brush. Dissolve stubborn deposits on metal with isopropyl alcohol and dry parts completely before screwing them together. Clean wooden or biodegradable grinders only with a brush and dry cloth. Stiff threads usually result from deposits.

Aluminium grinders and other materials: parts, sizes and care

A grinder is a cylinder in two halves with teeth on the inside that turn against each other. The range spans from small pocket models to large tabletop models. To tell models apart, it helps to look at the number of parts, the material, the grinder size in mm and the shape of the teeth.

A 4-piece grinder consists of a lid with teeth, a chamber with teeth and holes in the bottom, a collection chamber and a lower catch chamber at the very bottom. Between the two lowest parts sits a fine metal mesh screen. A 3-piece model lacks the screen and lower chamber, and a 2-piece has only the lid and one chamber. The number of parts affects height, weight and how many threads need to be kept clean.

An aluminium grinder is light and strong for its size. Aluminium grinders are usually anodised, which gives a hard, coloured surface. Zinc alloy is heavier and easier to cast, but the teeth can wear faster. Stainless steel is the heaviest option. Grinders made of wood, acrylic or biodegradable material weigh little, but their teeth are less durable than metal ones.

Grinder size in mm is given as the diameter. Pocket models are roughly between 30 and 50 mm, while tabletop models are often 55 mm or more. A large diameter gives more room in the chamber, but also takes more space in a bag or drawer. Height is listed where the manufacturer has measured it, and it increases with the number of parts. A 63 mm grinder has roughly twice the base area of a 45 mm one.

The teeth can be diamond-shaped, pyramid-shaped or arranged in sharp rows, and the shape is shown in the product images. The threads should be even and free of burrs. A grinder that turns stiffly or unevenly often has residue in the threads or a damaged part. A magnet in the lid holds the two top parts together without screwing. Straight threads and a tight lid mean the grinder can be carried without coming open.

For maintenance, take the grinder fully apart. Brush the screen gently from underneath so the mesh does not bend. Metal parts can soak in isopropyl alcohol for a while and then be rinsed in warm water. Dry every part thoroughly, especially the threads, before reassembling the grinder.

Guides and advice

Frequently asked questions

What is the difference between a 2-piece and a 4-piece grinder?
A 2-piece grinder has a lid and one chamber with teeth. A 4-piece grinder also has a middle chamber with a fine-mesh screen and a bottom chamber beneath it.
What materials are grinders available in?
Aluminium, other metals, wood and biodegradable material. Materials differ in weight and cleaning needs. Material, diameter and number of parts are on the product page.
How do I clean the grinder?
Remove loose residue with a soft brush. Follow the model's cleaning advice; wood, plastic, decoration and metal may have different requirements. Dry all parts completely before assembly.
How much is envelope shipping?
Small orders that fit in a padded envelope (letterbox delivery) cost NOK 49 to ship within Norway. Glassware, bongs and sets always ship as parcels. Shipping is free from NOK 799 and is calculated at checkout.
What does four-part mean?
The number counts the main sections that make up the grinder.

Products in this category