Cleaning metal, acrylic and wooden grinders

A grinder consists of a lid, teeth and chambers, often with a screen and magnetic lid. Its cleaning method depends on its material. This article covers the most common materials.

Take the grinder apart

Unscrew all parts: lid, toothed chamber, screen chamber and base. Place them on a clean surface.

Use a dry, stiff brush to remove loose residue from the teeth, screen and threads before wet cleaning.

Aluminium and zinc

Soak the metal parts briefly in isopropyl alcohol, then scrub with a brush. Rinse with warm water.

The screen is the most delicate part. Brush it gently from both sides without pushing holes through the mesh.

Acrylic

Strong alcohol can cloud or crack acrylic. Use warm soapy water and a soft brush, then rinse well.

Wood

Do not soak wood, as it can swell and crack. Use a dry brush and, if needed, a slightly damp cloth, then dry immediately.

Drying and reassembly

All parts must be completely dry before reassembly. Moisture in threads and around the magnet can cause corrosion and make the parts difficult to unscrew.

Isopropyl alcohol is flammable. Use in a well-ventilated room, away from open flames, and keep the bottle closed.

Frequently asked questions

Can an acrylic grinder be cleaned with isopropyl alcohol?
Strong alcohol can cloud or crack acrylic. Warm soapy water does not damage the material.
How should the screen be cleaned?
With a soft or medium-stiff brush from both sides, without pressing hard against the mesh.
Can the magnetic lid get wet?
The lid can be washed but must be completely dry before refitting to avoid corrosion around the magnet.