What is a gravity bong?

A gravity bong, also called a gravity infuser, is a construction with two chambers in which water flows from one chamber to the other. As the water moves, the pressure inside the chambers changes and air flows through the system. The name comes from the fact that gravity is what makes the water flow. This guide explains how the construction is built, which parts and materials are used, how it is cleaned and stored, and what to look for on the product page when comparing models.

The principle: two chambers and moving water

All gravity bongs are based on the same physical principle. A closed chamber has an opening at the top and an opening at the bottom. When water runs out through the bottom, a larger empty space forms inside the chamber. The pressure there becomes lower than the pressure outside, and air flows in through the top opening to even out the difference. This airflow passes through the bowl at the top and down into the chamber. How much air flows in depends on how much water runs out and how quickly. Once the water has finished running, the pressure is balanced and the airflow stops.

Two main types

Gravity bongs are usually divided into two types according to how the water is moved between the chambers.

Bucket model

The simplest form consists of an outer container of water and an inner chamber, often shaped like a bottle or a tube, that stands partly submerged in the water. The inner chamber is open at the bottom and has a cap with a bowl on top. When the chamber is lifted, the water runs out through the open bottom and back into the container, and air flows in through the cap. When the chamber is lowered again, it fills with water once more. This type is made in glass, plastic and silicone and is often sold as a set with container and insert.

Rotating hourglass model

The second type has two glass chambers one above the other, connected by a narrow passage in the middle, much like an hourglass. The chambers sit in a frame, often made of aluminium, and can be turned around an axle. When they are turned, the water runs from the upper chamber into the lower one, and air flows in through a valve or cap at the top. The frame holds the chambers steady, and the turn can be repeated from the other side. This type is larger and heavier than the bucket model and has more parts that can be replaced individually.

The parts

The names of the parts vary between manufacturers, but most gravity bongs have the same main components.

Chamber

The chambers are the containers that hold the water. In rotating models they are usually made of borosilicate glass, and the wall thickness may be stated in millimetres. In bucket models the inner chamber can also be plastic or silicone.

Valve and cap

The cap sits on top of the chamber and holds the bowl. Many caps have a one-way valve, such as a small ball or a silicone membrane, that controls which way the air can flow. Valves and seals are wear parts that must be kept clean to close tightly.

Bowl

The bowl is the small cup that sits in the cap. It can be made of glass, metal or ceramic. Some models have a 14 or 18 mm ground glass joint in the cap, so that an ordinary bowl can be used.

Frame and base

Rotating models have a frame with an axle and a base, often in anodised aluminium. The frame determines how steadily the unit stands and how smoothly the chambers can be turned.

Materials

Borosilicate glass is used for chambers and bowls. It handles temperature changes better than ordinary glass, does not absorb odours and is easy to see through when cleaning, but it can break if dropped. Aluminium is used for frames, axles and caps. It is light and keeps its shape, but anodised surfaces can be scratched and stained by abrasive cleaners and strong alkaline products. Silicone is used for seals, valves and some collapsible bucket models. It survives drops and can be bent, but may discolour over time. Some models also have screws or bowls in stainless steel.

Cleaning and maintenance

Take the construction apart as the manufacturer's instructions describe, and empty out all the water. Glass chambers are cleaned with isopropyl alcohol and coarse salt shaken around inside, then rinsed with warm, not boiling, water. Silicone parts are washed in warm soapy water. Aluminium is wiped with a cloth dampened with mild soapy water or isopropyl alcohol; avoid abrasive cleaners. Valves and seals are removed and cleaned separately, because residue in a valve can stop it from closing tightly. At the same time, check the seals for cracks and replace them when they have lost their shape. All parts should be dry before they are put back together. The water in the chambers should be changed often, since standing water leaves deposits on the glass.

Storage

Empty out the water and let the parts dry before storage. Rotating models can stand on their base on a stable surface, or they can be taken apart and placed in a padded case or the original packaging. Glass chambers should not lie directly against each other without something in between. Keep the parts out of reach of children.

What to look for

When comparing models, these are the points that are usually listed on the product page, or that you can ask the shop about.

Glass thickness

Given in millimetres. Thicker glass adds weight and withstands more mechanical stress, but no glass part is unbreakable.

Spare parts

Check whether chambers, caps, valves, seals and bowls are sold separately. A construction with many parts can be kept in working order longer when the wear parts can be replaced.

Size and weight

Height, width and weight show how much space the unit takes up and whether it fits in a cupboard. Larger chambers hold more water and are heavier to turn.

Joint

If the cap has a standard 14 or 18 mm joint, ordinary glass parts can be used. Gender and size are listed on the product page, in the same way as for other glass bongs.

Frequently asked questions

What is the difference between a gravity bong and an ordinary bong?
An ordinary bong has one water chamber where the water stays still. In a gravity bong the water flows between two chambers, and it is this movement that makes air flow through the system.
Why is it called gravity?
Because gravity is what makes the water run from the upper chamber to the lower one.
Can I buy spare parts?
It varies between models. The product page states which parts are included and which are sold separately.
Can the parts go in the dishwasher?
Follow the manufacturer's instructions. Glass and silicone are usually cleaned by hand, and anodised aluminium can be discoloured by dishwasher detergent.