Cleaning a bong: products and procedure

Clean glass bongs with isopropyl alcohol, coarse salt and warm water, and silicone with soapy water. This guide covers equipment, each step, drying and solvent safety.

What you need

Isopropyl alcohol at 90 percent or higher, coarse salt, warm water, a bottle brush or long brush, pipe cleaners for narrow passages, a zip bag for small parts, and plugs or a towel to cover the openings.

Glass cleaning procedure

Cleaning takes six steps.

1. Disassemble

Empty the water chamber and remove the bowl and downstem. Clean them separately.

2. Rinse

Rinse with warm, not boiling water. Let the glass reach room temperature first to avoid sudden temperature changes.

3. Isopropyl alcohol and salt

Pour isopropyl alcohol and a couple of tablespoons of coarse salt into the water chamber. The salt acts as an abrasive against the glass wall.

4. Shake

Cover openings with plugs or a towel and shake gently, allowing the mixture to reach all surfaces and percolators.

5. Let it work

For heavy deposits, let the mixture sit before shaking again. Place small parts in a plastic bag with isopropyl alcohol and salt.

6. Rinse and brush

Rinse with warm water until all salt and isopropyl alcohol are gone. Use a brush or pipe cleaner on remaining deposits.

Drying and storage

Air-dry the parts upside down on a towel, or dry with a lint-free cloth. Do not reassemble until the joints are dry. Store upright on a stable surface or in a padded bag.

Solvent safety

Isopropyl alcohol is flammable. Use in a well-ventilated room, far from open flames and heat, and keep the bottle closed out of children's reach. Gloves are recommended. Small amounts of used isopropyl alcohol with salt can be flushed with plenty of water; take larger amounts to hazardous-waste collection.

Glass and silicone

Glass tolerates isopropyl alcohol and coarse salt. Clean silicone with warm soapy water and a brush; check the product page for dishwasher suitability. Do not soak silicone in isopropyl alcohol for long periods. Acrylic does not tolerate isopropyl alcohol; use soapy water.

Frequently asked questions

Can I use boiling water on glass?
No. Borosilicate glass tolerates temperature changes well, but boiling water on cold glass can cause cracks. Use warm tap water.
Which isopropyl alcohol should I use?
Isopropyl alcohol at 90 percent or higher. It dissolves deposits faster than weaker mixtures.
How do I clean narrow percolators?
Shake isopropyl alcohol and salt through the chamber, leave it longer and rinse thoroughly. Pipe cleaners reach into narrow passages.