Pipes

The pipe collection spans different materials, lengths and figure shapes. Compare materials first, then the bowl and stem.

Pipe buying guide: material, shape, size and cleaning

A pipe has no water chamber or moving parts. The bowl and short tube leading to the mouthpiece are formed together. Models differ in material, shape and size; the range is divided into glass and silicone. The points below most often distinguish two pipes.

Material. Glass pipes use borosilicate glass, also used in laboratory equipment. It is chemically stable, transparent and tolerates isopropyl alcohol but not drops onto hard surfaces. Silicone pipes are moulded from soft silicone that withstands drops and bends without damage. The bowl is usually glass or metal, and the wall is not transparent.

Glass or silicone. Glass offers full visibility and a smooth surface that is easy to inspect. Silicone is lightweight and does not shatter but needs different washing from glass. Silicone pipes often have a removable bowl for cleaning. Material is in each item's technical data.

Shape. A spoon is short and flat, a sherlock has a curved tube, and a chillum is a straight tube. Figure pipes have sculpted shapes but the same structure as a hand pipe. An oil burner is a straight glass tube with a sphere at the end. Shape affects how the pipe sits in the hand and how easy it is to clean.

Size and weight. Pipe length is stated in centimetres. Short pipes fit in a pocket or case; longer pipes have longer tubes and more glass. Thick-walled glass pipes weigh more and resist impacts better. Length, material and weight appear in each item's technical data.

Glass pipes and silicone pipes: construction, glass inserts and care

A glass hand pipe is one of the simplest constructions in the range: a single piece of shaped glass with a bowl, a channel and a mouthpiece. Silicone pipes are built differently, with a moulded body and a separate insert in the bowl. Here we look at how the two types are put together, how they are kept clean, and what is worth checking on the product page.

A glass pipe is usually shaped from a single glass tube worked while the glass is hot. Wall thickness varies along the pipe and is often greatest around the bowl. Many glass pipes have a small hole on the side of the bowl and a flattened underside, so the pipe rests steadily on a table. Patterns and colours are made in the glass itself and do not wash off.

A silicone pipe has a body of soft silicone and a bowl of glass or metal. A pipe with a glass insert has a loose glass bowl pressed down into the silicone. The insert can be taken out and washed separately, and replaced if it cracks. Measure the diameter of the insert before ordering a new one, since sizes are not standardised between manufacturers.

A glass pipe is cleaned with isopropyl alcohol and coarse salt in a sealed bag or container, then rinsed in warm water. Pipe cleaners reach into the narrow channel. For the silicone body, warm soapy water is usually enough, while the glass insert can be soaked in isopropyl alcohol. Let all parts dry completely before reassembly.

Glass and silicone pipes of the same length can differ a lot in weight. Thick-walled glass makes a heavier pipe, while silicone keeps the weight down. The inner diameter and depth of the bowl also vary, and are listed where the manufacturer has measured them. If you need a replacement bowl for a silicone pipe, the measurements rather than the shape decide whether it fits. The subcategories for glass pipes and silicone pipes show one material type at a time.

A glass pipe will not survive a fall onto stone or tiles. A padded case or a box with foam lining protects against knocks in a bag or drawer. Silicone pipes can be stored loose, but should be kept away from sharp objects that could cut the material. Length, weight and material are listed in the technical data, so models can be compared before purchase.

Guides and advice

Frequently asked questions

What should I check when choosing a pipe?
Compare dimensions, material, weight and any removable parts. Check images and technical information before choosing a model.
How do I clean a glass pipe?
Use a cleaner suitable for the specific item and rinse thoroughly. Avoid sudden temperature changes and hard tools that can damage glass.
What should I know about silicone pipes?
Silicone models may have glass or metal parts with different care needs. Check the item's material information. Do not assume all models are food-grade, BPA-free or dishwasher-safe without documentation.
What is the difference between a spoon, sherlock and chillum?
A spoon is short and flat, a sherlock has a curved tube, and a chillum is a straight tube without an expanded bowl. Shape is in the product name or description.
What is the difference between a pipe and a bubbler?
A pipe has no water chamber. A bubbler is a small one-piece water pipe with its own water chamber. Bubblers under 15 cm are listed under Pipes.
How is a glass pipe shipped?
Glass pipes are packed with shock protection and shipped from Ålesund in plain packaging with no exterior information about the contents.
How does a sleeve differ from the bowl?
The sleeve wraps around the outside of the pipe. The bowl holds the tobacco.

Products in this category