Glass and acrylic: material differences
Glass and acrylic are common in water pipes and accessories. This guide describes the differences in properties and cleaning.
Borosilicate glass
Borosilicate glass contains boron trioxide, giving low thermal expansion. It therefore withstands rapid temperature changes better than ordinary soda-lime glass. It is hard, scratch-resistant and stays clear but can crack or shatter if dropped or struck.
Acrylic
Acrylic (PMMA) is a transparent plastic. It is lighter than glass and withstands drops and impacts without shattering. It is softer than glass, scratches more easily and tolerates lower temperatures; strong heat can deform it.
Weight and wall thickness
Glass weighs more than acrylic at the same size, and its weight increases with glass thickness, often stated in millimetres. Acrylic stays lightweight even in larger sizes.
Transparency over time
Glass stays clear because its surface is hard and does not absorb colour. Acrylic can become cloudy from scratches and discolour over time, especially with unsuitable cleaning products.
Cleaning glass
Borosilicate glass tolerates isopropyl alcohol and coarse salt. Shake or brush parts with the mixture, rinse thoroughly in warm water and dry. Do not rinse cold glass immediately with boiling water. Isopropyl alcohol is flammable; keep away from open flames.
Cleaning acrylic
Clean acrylic with lukewarm water, mild soap and a soft brush or cloth. Acrylic does not tolerate isopropyl alcohol, acetone or other solvents: these can cause fine surface cracks and clouding. Abrasives such as coarse salt or scouring powder cause scratches.
Frequently asked questions
- Can acrylic be cleaned with isopropyl alcohol?
- No. Isopropyl alcohol and other solvents can cause fine cracks in acrylic. Use lukewarm water and mild soap.
- Why does borosilicate glass tolerate temperature changes?
- Boron trioxide gives low thermal expansion, so the glass expands less when heated.
- Which material is lightest?
- Acrylic is lighter than glass at the same size.